https://www.iowaheritage.org/items/browse?tags=James+O+Crosby&output=atom <![CDATA[Iowa Heritage Digital Collections]]> 2024-03-28T09:25:35+00:00 Omeka https://www.iowaheritage.org/items/show/80789 <![CDATA[Mill - Motor Mill and a birds eye view]]> 2019-03-28T17:52:23+00:00

Title

Mill - Motor Mill and a birds eye view

Description

This photo was taken from a high elevation across the river. Motor Mill is located on the Turkey River six miles down stream from Elkader. This six story structure stands approximately fifty feet wide, sixty feet long and over ninety feet high with walls that are five feet thick at the bottom, tapering to two feet at the top. The huge limestone blocks were quarried and transported by cable car from the bluffs above the mill. The mill, built by John Thompson, displays the handiwork of four skilled German masons from Communia. Each wall was constructed by a different mason who was trying to outdo the other masons. Three sides were laid with carefully chipped rounded stone while the fourth, the intake side, was laid with perfectly square cut stone. No two sides are alike. All beams were pegged in and not one nail was used in construction. The wheels and burrs were imported from Italy. More up to date pictures of Motor Mill can be found at millpictures.com . More information on Motor Mill can be found at www.motormill.org or www.claytonconservation.org

Source

James O. Crosby
Garnavillo Public Library - AR Collection
Garnavillo Historical Society Archives

Date

1867

Rights

This digital image may be used for educational purposes as long as it is not altered in anyway. No commercial reproduction or distribution of this file is permitted.

Format

photocopy

Type

still image

Identifier

GEM pg 94

Original Format

photocopy

File Name

MotorMillBirdsEyeView.jpg

Repository

Garnavillo Public Library - AR Collection
Garnavillo Historical Society

Repository Collection

Garnavillo Public Library - AR Collection
Garnavillo Historical Society Archives

Digital item created

2017-wolter
]]>
https://www.iowaheritage.org/items/show/80788 <![CDATA[Mill - Motor Mill and bridge 1970]]> 2019-03-28T17:52:23+00:00

Title

Mill - Motor Mill and bridge 1970

Description

Motor Mill is located on the Turkey River six miles down stream from Elkader. This six story structure stands approximately fifty feet wide, sixty feet long and over ninety feet high with walls that are five feet thick at the bottom, tapering to two feet at the top. The huge limestone blocks were quarried and transported by cable car from the bluffs above the mill. The mill, built by John Thompson, displays the handiwork of four skilled German masons from Communia. Each wall was constructed by a different mason who was trying to outdo the other masons. Three sides were laid with carefully chipped rounded stone while the fourth, the intake side, was laid with perfectly square cut stone. No two sides are alike. All beams were pegged in and not one nail was used in construction. The wheels and burrs were imported from Italy. A Pin Connected Pratt Through Truss steal bridge was built at Motor in 1895. The bridge had two 95 foot spans with a 16 foot wide wood deck. In June of 1991 flood waters destroyed the south span. The span was not replaced due to low traffic counts and the historic nature of the bridge. The north span was then destroyed by the flood of 2008. More up to date pictures of Motor Mill can be found at millpictures.com . More information on Motor Mill can be found at www.motormill.org or www.claytonconservation.org

Creator

Roggman, Arnold
Garnavillo Public Library - AR Collection

Source

Arnold Roggman photo collection

Date

1970

Rights

This digital image may be used for educational purposes as long as it is not altered in anyway. No commercial reproduction or distribution of this file is permitted.

Format

photo 8x10 BW

Type

still image

Identifier

Roggman 606 photo

Original Format

photo

Physical Dimensions

8x10

File Name

MotorMillandBridge.jpg

Repository

Garnavillo Public Library - AR Collection

Repository Collection

Garnavillo Public Library - AR Collection

Digital item created

2017-wolter
]]>
https://www.iowaheritage.org/items/show/80787 <![CDATA[Mill - Motor Mill with three men in photo]]> This may be the only photo remaining that was taken while the mill was still in operation. Shown is the first bridge at the Motor location with its significant sidewalls and one of the three stone piers. Also shown is a section of the dam with water spilling over it and visiable is a good portion of the mill race or flume with spaced openings allowing water drainage. Three men posed for the photographer, one in the tree, another on the river bank and a third at the end of the bridge. ]]> 2019-03-28T17:52:23+00:00

Title

Mill - Motor Mill with three men in photo

Description

Motor Mill is located on the Turkey River six miles down stream from Elkader. This six story structure stands approximately fifty feet wide, sixty feet long and over ninety feet high with walls that are five feet thick at the bottom, tapering to two feet at the top. The huge limestone blocks were quarried and transported by cable car from the bluffs above the mill. The mill, built by John Thompson, displays the handiwork of four skilled German masons from Communia. Each wall was constructed by a different mason who was trying to outdo the other masons. Three sides were laid with carefully chipped rounded stone while the fourth, the intake side, was laid with perfectly square cut stone. No two sides are alike. All beams were pegged in and not one nail was used in construction. The wheels and burrs were imported from Italy. The original bridge at Motor was a high-sided wooden structure built in 1868. According to John Thompson’s request for bids, the bridge had three 54 foot spans 16 feet wide. The north and south end had a 15 foot approach made of timber and plank. The three spans were Howe Truss and the 5 or 6 foot high wooden sides were simply added to enclose the trusses. More up to date pictures of Motor Mill can be found at millpictures.com . More information on Motor Mill can be found at www.motormill.org or www.claytonconservation.org
This may be the only photo remaining that was taken while the mill was still in operation. Shown is the first bridge at the Motor location with its significant sidewalls and one of the three stone piers. Also shown is a section of the dam with water spilling over it and visiable is a good portion of the mill race or flume with spaced openings allowing water drainage. Three men posed for the photographer, one in the tree, another on the river bank and a third at the end of the bridge.

Source

Garnavillo Historical Society ;
Crosby, James O;
Garnavillo Public Library - AR Collection;
GEM of the Prairie Book -A. Roggman

Date

1867

Rights

This digital image may be used for educational purposes as long as it is not altered in anyway. No commercial reproduction or distribution of this file is permitted.

Format

photocopy

Type

still image

Identifier

GEM pg 99

Original Format

photo

File Name

MotorMill-3men.jpg

Repository

Garnavillo Public Library - AR Collection
Garnavillo Historical Society

Repository Collection

Garnavillo Public Library - AR Collection
Garnavillo Historical Society Archives

Digital item created

2017-wolter
]]>
https://www.iowaheritage.org/items/show/80785 <![CDATA[Mill - Motor Mill]]> 2019-03-28T17:52:23+00:00

Title

Mill - Motor Mill

Description

Motor Mill is located on the Turkey River six miles down stream from Elkader. This six story structure stands approximately fifty feet wide, sixty feet long and over ninety feet high with walls that are five feet thick at the bottom, tapering to two feet at the top. The huge limestone blocks were quarried and transported by cable car from the bluffs above the mill. The mill, built by John Thompson, displays the handiwork of four skilled German masons from Communia. Each wall was constructed by a different mason who was trying to outdo the other masons. Three sides were laid with carefully chipped rounded stone while the fourth, the intake side, was laid with perfectly square cut stone. No two sides are alike. All beams were pegged in and not one nail was used in construction. The wheels and burrs were imported from Italy. More up to date pictures of Motor Mill can be found at millpictures.com . More information on Motor Mill can be found at www.motormill.org or www.claytonconservation.org

Source

Garnavillo Historical Society
Pust, Earl Mrs.
Old Elkader Facts and Food
Muller, Jeanette

Date

1867-

Rights

This digital image may be used for educational purposes as long as it is not altered in anyway. No commercial reproduction or distribution of this file is permitted.

Format

photo

Type

still image

Original Format

photo

File Name

Motormill.jpg

Repository

Garnavillo Historical Society

Repository Collection

Garnavillo Historical Society Archives

Digital item created

2017-wolter
]]>